Help needed

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Help needed

Postby PBelvir » Fri Oct 12, 2007 12:25 am

Hi every one

I left my undamaged Raleigh road frame with a frame builder to have it resprayed. After 2 months I was told to my surprise that it was "all bent" although the undercoat had been applied!!!!! I would like to know if anyone else has had a similar experience or could provide some advice on how to take this matter forwards as the owner has denied liability.

Thank you very much
PBelvir
is new here, be extra Agreeable to them!
 
Posts: 4
Joined: Sun Mar 04, 2007 2:24 pm
Location: Croydon

Postby Snoop Doug » Fri Oct 12, 2007 8:01 am

Hmmmm - long shot but have you any recent pics that yo could show him - minus any bends...?
Snoop Doug
 

Postby Mike I » Fri Oct 12, 2007 8:43 am

What exactly does he mean by "all bent"? And why has it taken 2 months and an undercoat to notice? If he means bent in the sense of 'looks like a bus has run over it', the fact that he didn't mention it earlier indicates it has happened while he had it.

Or is he saying that it needs re-tracking? Over time, with hard riding and the occasional knock, forks and stays get out of alignment. It would be difficult to show that he had caused this. A frame-builder should be able to fix it though.

I think you need to establish the nature and extent of the damage and take it from there.
User avatar
Mike I
lives on this board 24/7!!!
 
Posts: 1454
Joined: Fri Feb 21, 2003 9:35 am
Location: Tooting

Postby Matt Robbins » Fri Oct 12, 2007 9:07 am

Maybe you should threaten to name and shame this "frame builder" on every cycling forum going and report him to British Cycling, CTC, Trading Standards, Local MP etc etc etc...the power of forums like this is pretty big now. As an example there is a forum for fixed gear riders in london, on there a certain frame resprayer in south east london has been getting some bad press (unfairly I think) and it certainly made me think twice about going there, even though I know he is a pretty sound bloke.

As an aside if you want a really good powder coat on a frame try ADEPT finishers on Thornton Heath Pond...the guy who owns it's son is a pretty hand y TTer and track rider so he really understands bikes....and it only took 3 days!!!
Matt Robbins
...
 
Posts: 104
Joined: Tue Mar 21, 2006 12:22 pm

Postby PBelvir » Fri Oct 12, 2007 9:09 pm

thank you all for your comments and suggestions.

my point exactly why did it take a sand blast, an undercoat and 2 months to notice that frame was damaged??????????????

the damage is really noticable and you do not have to be an expert to see it. the frame is bent like a banana. i wanted to insert a couple of pics but i am not sure how to do it. the owner of the frame building firm has concluded that a motor vehicle must have reversed and squashed the bike against a wall in a garage. anyway he says it cannot be repaired.

if i cannot enter in a more sensible argument with frame builder then i will have to consider naming and shaming.

if anymore of you have had similar experiences please let me know

thank you

Philippe
PBelvir
is new here, be extra Agreeable to them!
 
Posts: 4
Joined: Sun Mar 04, 2007 2:24 pm
Location: Croydon

Postby Andrew G » Fri Oct 12, 2007 9:21 pm

I'd take a very strong attitude with them if they've bent the frame. Could also be worth mentioning that apart from naming and shaming on the net etc that you ride for a club with 250 members, just featured in CW, with a staff member in the club.

Hollow threats and name no names but it may help persuade.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Postby Hal » Sat Oct 13, 2007 9:10 pm

I sounds pretty convincingly like the damage occurred while the frame was in his care. As it is un-repairable I would suggest you approach them for an offer of compensation that you are willing to accept in light of their error. Find out how much it will cost for similar spec frame, perhaps add an extra compensation for inconvenience caused / sentimental attachment to the old frame.

If he is not going to take any responsibility then the http://www.tradingstandards.gov.uk may be able to give you some more advice, or a threat of taking him to the small claims court.

Good luck

H
User avatar
Hal
lives on this board 24/7!!!
 
Posts: 325
Joined: Fri Nov 10, 2006 2:55 pm
Location: Beautiful Croydon

Postby Mike I » Sun Oct 14, 2007 3:11 pm

Check your home insurance to see whether you have legal expenses cover; you might also try Citizens' Advice.

I would be very careful about actually going down the 'name and shame' route. Libel laws are loaded against you, and it isn't going to get you a new frame or compensation.
User avatar
Mike I
lives on this board 24/7!!!
 
Posts: 1454
Joined: Fri Feb 21, 2003 9:35 am
Location: Tooting

Postby PBelvir » Sun Oct 14, 2007 6:01 pm

thank you for all the suggestions, very useful
I prefer not to mention any names at the moment
just see how things develop
PBelvir
is new here, be extra Agreeable to them!
 
Posts: 4
Joined: Sun Mar 04, 2007 2:24 pm
Location: Croydon

Postby John Cochrane » Sun Oct 14, 2007 9:32 pm

[quote="Seanieh_LanterneRouge©"][quote="44x18"]Check your home insurance to see whether you have legal expenses cover; you might also try Citizens' Advice.

I would be very careful about actually going down the 'name and shame' route. Libel laws are loaded against you, and it isn't going to get you a new frame or compensation.


Libel is if you say something in print, slander I think is when you verbally slag someone off. No doubt I'm probably wrong ;-)

Good luck all the same.


Correct but Libel also applies to what is spoken on radio or TV. In Libel it is only necessary to prove that the information was not correct. You don't have to prove loss/damages. In Slander you must prove loss/damages.
John Cochrane
...
 
Posts: 135
Joined: Mon Jul 05, 2004 7:17 pm
Location: Forestdale


Return to General

Who is online

Users browsing this forum: No registered users and 66 guests

cron