Stronger drivechain.

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Stronger drivechain.

Postby Alex S » Fri Mar 06, 2009 2:35 pm

Ok so im fed up of breaking chains. Someone recommend me a stronger one.

I had an Ultegra 10spd chain and It snapped powering up a hill, ok, granted, but I looked at the chain and it had about 6 other links that had similar cracks halfway across them. Oh sorry this was about a 3 month old chain, maybe 500 miles. Shimano = Fail.

I've snapped 3 SRAM £10 chains in a month before on a singlespeed, once the powerlink itself snapped, SRAM = Fail.

What to try next?
User avatar
Alex S
...
 
Posts: 196
Joined: Sat Jan 24, 2009 9:23 am
Location: SM6 0TF

Re: Stronger drivechain.

Postby Alex S » Fri Mar 06, 2009 2:40 pm

And while I'm here, I have so many problems with SINGLESPEED FREEWHEELS as well. anyone recommend me some that might actually last longer than 250 miles? I've tried:

Dicta (BMX brand - didnt last long.)
Shimano (I hated this one the most. constant clicking noise.)
GB Unbranded freewheel. (Actually I take it back, I hated this one the most)
and some other 12-15 quid freewheels, but not found any ones that I can get on with yet.

Any singlespeeders here? Care to share some knowledge?
User avatar
Alex S
...
 
Posts: 196
Joined: Sat Jan 24, 2009 9:23 am
Location: SM6 0TF

Re: Stronger drivechain.

Postby Dan_K » Fri Mar 06, 2009 2:41 pm

How about Goldie Lookin Chain? Apparently, they're WELL hard.
User avatar
Dan_K
lives on this board 24/7!!!
 
Posts: 670
Joined: Tue Feb 03, 2009 4:18 pm

Re: Stronger drivechain.

Postby Andy E » Fri Mar 06, 2009 3:51 pm

Unless you're Tom Boonen in disguise then you've probably just had bad luck. I've used Ultegra chains on 3 seperate bikes, racking up over 15,000km and have never had any problems (although i suspect i will on the CR tomorrow now :roll: )
Andy E
lives on this board 24/7!!!
 
Posts: 398
Joined: Wed May 21, 2008 6:02 pm

Re: Stronger drivechain.

Postby Marky Mark » Fri Mar 06, 2009 5:06 pm

KMC gets my vote
User avatar
Marky Mark
lives on this board 24/7!!!
 
Posts: 1575
Joined: Tue Mar 11, 2008 2:55 pm
Location: Riddlesdown /Purley

Re: Stronger drivechain.

Postby -Adam- » Fri Mar 06, 2009 5:50 pm

Learn how to install them correctly?
User avatar
-Adam-
lives on this board 24/7!!!
 
Posts: 3515
Joined: Thu Jan 12, 2006 9:38 pm
Location: Kingston/Epsom, well, everywhere really!

Re: Stronger drivechain.

Postby Alex S » Fri Mar 06, 2009 6:57 pm

[quote]Learn how to install them correctly?


I don't think its that ;)
User avatar
Alex S
...
 
Posts: 196
Joined: Sat Jan 24, 2009 9:23 am
Location: SM6 0TF

Re: Stronger drivechain.

Postby Steve W » Fri Mar 06, 2009 7:40 pm

[url]
http://www.whiteind.com/singlespeedgear ... heels.html[/url]

All single speed freewheels are cr*p apart from White industries, only problem is you need deep pockets for these £69 or so :(
Steve W
...
 
Posts: 121
Joined: Sun Jan 08, 2006 4:01 pm
Location: East Croydon

Re: Stronger drivechain.

Postby Andrew G » Fri Mar 06, 2009 9:19 pm

[quote="Alex S"][quote]Learn how to install them correctly?


I don't think its that ;)

No offense but it probably is. 10 speed chains are so narrow and with such narrow plates that joining them has to be spot on or they can pull apart (I had one go on a hill too for this reason). As said you (or I) won't be breaking chains with our power.

Another vote for KMC. Very good chains, run and index smoothly, and the power link (or whatever they call theirs) makes fitting a doddle and always secure. Go for the normal X10 not the SL version. The SL just has drilled pins etc and costs a stupid amount of money for saving a pathetic amount of weight. Personally I'm not a fan of drilled chains anyway as I'd rather have the strength and haul that extra couple of grams about.

Freewheel :? fixed :wink:
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Stronger drivechain.

Postby Alex S » Fri Mar 06, 2009 11:21 pm

FIXED MAKES ME CRY.
User avatar
Alex S
...
 
Posts: 196
Joined: Sat Jan 24, 2009 9:23 am
Location: SM6 0TF

Re: Stronger drivechain.

Postby Alex S » Fri Mar 06, 2009 11:25 pm

Even assuming a cytech level 3 qualification isnt enough to fit a chain, it wouldnt explain the 6 other cracks in other links.

White industries. wow. they look amazing. I might have to splurge. anyone know any UK distributors?
User avatar
Alex S
...
 
Posts: 196
Joined: Sat Jan 24, 2009 9:23 am
Location: SM6 0TF

Re: Stronger drivechain.

Postby Steve W » Sat Mar 07, 2009 12:18 am

Check out Hardy Bikes for the freewheel

http://www.hardie-bikes.com/products.ph ... p454&rs=gb

:wink:
Steve W
...
 
Posts: 121
Joined: Sun Jan 08, 2006 4:01 pm
Location: East Croydon

Re: Stronger drivechain.

Postby Will » Sat Mar 07, 2009 11:35 am

I use a White Industries freewheel on my Condor Pista

(The one that came with the bike was cheap Shimano rubbish)

The WI freewheel is a beautiful piece of engineering and is very easy to service/maintain (all parts can be replaced)

The obvious downside is that they're not cheap - especially not with current £/$ exchange rates

Sideways Cycles are one of the main UK stockists
Will
lives on this board 24/7!!!
 
Posts: 723
Joined: Thu Nov 28, 2002 10:02 am

Re: Stronger drivechain.

Postby Alex S » Tue Mar 10, 2009 2:30 pm

just ordered myself a WI freewheel from sideways. got the trials one because its green and clickier.

thanks for the advice all.
User avatar
Alex S
...
 
Posts: 196
Joined: Sat Jan 24, 2009 9:23 am
Location: SM6 0TF

Re: Stronger drivechain.

Postby Sylv » Tue Mar 10, 2009 2:40 pm

have fun - i've had mine (red) for ... well i can't remember exactly, but a long long time.

for the chain, i've had a sram (pc1 i think, the bmx one) for years too. with a quick link but the solid type (with one male and one female part), looks like this

[img]http://ecx.images-amazon.com/images/I/31KE96KMB0L._SS500_.jpg[/img]
User avatar
Sylv
lives on this board 24/7!!!
 
Posts: 5742
Joined: Wed Mar 21, 2007 2:40 pm
Location: londinium, lugdunum

Next

Return to General

Who is online

Users browsing this forum: No registered users and 2 guests

cron