Cleaning bike chain and gears

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Cleaning bike chain and gears

Postby Mohammad L » Wed Apr 10, 2013 2:56 pm

I currently use one of those chain cleaner machines for cleaning the chain, then dry the chain, then apply thin layer of lube + remove excess

For the gears, I remove the wheel from the bike and spray WD40 onto the cassette.

The problem: both the gears and chain collect dirt quite quickly despite not doing much mileage

What cleaning methods do other people use and how effective are they?

Thanks
User avatar
Mohammad L
...
 
Posts: 186
Joined: Fri Dec 09, 2011 5:45 pm

Re: Cleaning bike chain and gears

Postby Phil H » Wed Apr 10, 2013 3:03 pm

Chain: undo the quick link, drop it into a jar of white spirit. Shake.

Cassette: Take it off and wash it in the sink with degreaser.

Other stuff: degreaser (diluted) and a stiff brush.

If you've seen my bike recently you may not believe that I have ever done this but I have.
User avatar
Phil H
Site Admin
 
Posts: 1883
Joined: Thu Sep 10, 2009 10:52 pm

Re: Cleaning bike chain and gears

Postby DavidKennett » Wed Apr 10, 2013 3:47 pm

WD40 is the juice of Satan :twisted:
User avatar
DavidKennett
lives on this board 24/7!!!
 
Posts: 464
Joined: Fri Dec 20, 2002 4:35 pm
Location: Kenley

Re: Cleaning bike chain and gears

Postby Phil H » Wed Apr 10, 2013 4:58 pm

[quote="DavidKennett"]WD40 is the juice of Satan :twisted:

It works OK for cleaning stuff but is of no use for any sort of lubrication.
User avatar
Phil H
Site Admin
 
Posts: 1883
Joined: Thu Sep 10, 2009 10:52 pm

Re: Cleaning bike chain and gears

Postby Andrew G » Wed Apr 10, 2013 5:14 pm

White spirit on a rag for cleaning / degreasing, then dry it off and apply a small bit of lube.

I don't bother removing the chain, can run it easily through your hand with the rag on it and it cleans quickly and efficiently. If a quick once over then run the rag over the sprockets and poke in the gaps between with a thin pointy thing of your choice. For a proper clean then remove the cassette and clean each sprocket thoroughly and dry before throwing back on the wheel. The quick method for post grotty ride home from work or the weekend after. The proper method otherwise, only takes a few minutes.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Cleaning bike chain and gears

Postby spike » Wed Apr 10, 2013 6:55 pm

I use dry lubes (Squirt usually) Chain stays much cleaner and bike too. Usual regime is put-it-in-the-shed. Every 5-6 rides it gets a quick wipe with dry rag and then relube (the wax beads off taking dirt with it). Only after very wet rides does the bike usually need a clean and then usually its just water and a brush.

I started using dry lubes on my summer mtb, now use them on all except the winter commuter. They need to be reapplied more often than wet lube but the bike stays much cleaner and my impression is that the drive trains last longer too.
spike
.
 
Posts: 44
Joined: Thu Sep 10, 2009 3:51 pm

Re: Cleaning bike chain and gears

Postby Keith » Wed Apr 10, 2013 7:26 pm

[quote="Mohammad L"]
The problem: both the gears and chain collect dirt quite quickly despite not doing much mileage

:shock: :?: Are there two Mohammed L's in ACC? :wink:
User avatar
Keith
lives on this board 24/7!!!
 
Posts: 1796
Joined: Sun Sep 23, 2007 2:55 pm

Re: Cleaning bike chain and gears

Postby Mohammad L » Wed Apr 10, 2013 8:05 pm

Thanks guys -I'm not too familiar with this maintenance stuff - any recommendations for a good white spirit and where to buy?

Also, I am thinking of getting a workstand for general bike maintenance. Any recommendations for a reliable, sturdy one? ( Bear in mind its for a heavy 13kg training bike - the clamp of the Lifeline one I got from Wiggle snapped, presumably due to the bike weight)
User avatar
Mohammad L
...
 
Posts: 186
Joined: Fri Dec 09, 2011 5:45 pm

Re: Cleaning bike chain and gears

Postby olderigetbetteriwas » Wed Apr 10, 2013 10:34 pm

mo, get your chain a little present and buy it a quick link and a quick link removal tool...then get a couple of chinese takeaway containers (obviously eat the chinese)...(the takeaway, not the actual people)...then go to halfords and buy their degreaser called Gunk in a tin...not from the bike section but from the car section...and a spray-on degreaser (muck off or something)...then soak the chain and scrub it with an old toothbrush...remove the cassette and soak it too and scrub it with the toothbrush....spray on degreaser to anything else on the bike that is mucked up....rinse it all off under a tap (chain and cassette) or with water from a bucket (stuff still on your bike)....dry it all with a cloth...then take your pick of wet lube (i like finish line cross country for my training bike) or dry lube (at the moment i like finish line dry teflon bike lube for my good bike)....and i'm with david here...never use wd40 anywhere near anything starting with a 'b' and rhyming with icicle.

ps wear gloves...marigolds are always a good look...coz otherwise your skin with probably dry out and peel off your fingers around 36 hours after you first lay your eyes on your fantastic, shiny, glossy, clean, smooth-running drivetrain.
User avatar
olderigetbetteriwas
...
 
Posts: 112
Joined: Thu May 05, 2011 8:43 pm

Re: Cleaning bike chain and gears

Postby Mohammad L » Thu Apr 11, 2013 9:50 am

Thanks Rich, I'll get a KMC 9 speed chain link for my chain
User avatar
Mohammad L
...
 
Posts: 186
Joined: Fri Dec 09, 2011 5:45 pm

Re: Cleaning bike chain and gears

Postby George » Thu Apr 11, 2013 8:49 pm

Mo if you keep splitting your chain one day you will not install the link correctly and the chain will snap at the start of a tt just ask Matt Chapman :lol:
just do what Andrew says clean through your fingers in a rag
User avatar
George
lives on this board 24/7!!!
 
Posts: 2269
Joined: Fri Apr 04, 2003 10:20 am
Location: at a Conference in london

Re: Cleaning bike chain and gears

Postby DavidKennett » Fri Apr 12, 2013 9:26 am

"A clean bike is a fast bike" :D http://www.youtube.com/watch?v=Sf80DnCg ... ata_player *

*ignore the jetwashing unless you can replace parts on a regular basis
User avatar
DavidKennett
lives on this board 24/7!!!
 
Posts: 464
Joined: Fri Dec 20, 2002 4:35 pm
Location: Kenley

Re: Cleaning bike chain and gears

Postby Antloony » Fri Apr 12, 2013 4:33 pm

[quote="DavidKennett"]"A clean bike is a fast bike"


Hence why mine is always spotless.....just wish the rider was a bit faster.

I am sad, I love cleaning my bikes.
User avatar
Antloony
lives on this board 24/7!!!
 
Posts: 1953
Joined: Mon Dec 03, 2007 5:08 pm
Location: Sutton

Re: Cleaning bike chain and gears

Postby sonic909 » Thu May 02, 2013 10:39 pm

GT85 is better for spraying as it contains teflon.
Keith W "The bus lane warrior!"
User avatar
sonic909
lives on this board 24/7!!!
 
Posts: 357
Joined: Mon Apr 21, 2008 11:14 pm

Re: Cleaning bike chain and gears

Postby Mohammad L » Thu May 16, 2013 10:01 am

On the hunt for a well-priced citrus degreaser. Came across this : [url]http://www.motocleaningproducts.co.uk/mukjunkie-citrus-degreaser-5-litre-mj259015m[/url]

Intended use is on vehicle parts. Would it be ok to soak chain and cassette in?
User avatar
Mohammad L
...
 
Posts: 186
Joined: Fri Dec 09, 2011 5:45 pm

Next

Return to General

Who is online

Users browsing this forum: No registered users and 17 guests

cron