Chains - probably one for Guru Paul.

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Chains - probably one for Guru Paul.

Postby Andrew G » Fri Sep 14, 2007 11:06 am

Re Stu’s broken chain, and MrPVT’s comment about not fixing them properly, what’s the score with a 10 speed chain?

Only had one chain split and that was when I fitted a triple to a bike and got the length wrong. Ended up splitting the chain 3 times :roll: before I got it right. Although I’m sure I had it together properly, with all the pins even, it pulled a rivet from a plate on the first hill.

The 10 speed chains are very narrow and the manufacturers say to use a specific tool, I’ve always treated this as just trying to con you out of some cash, and used my normal chain splitters.

What’s the score?
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Postby richv » Fri Sep 14, 2007 12:25 pm

Don't waste your money on Shi*ano or Campag chains they're far too expensive.

Buy a cheap KMC 10speed chain. Comes with a sram-type link so you can fix it easily (and remove and replace it easily when you clean it properly which I'm sure you do :wink: ).

If you're worried about the extra weight just drink one less pint on a Friday and then you're saving money on the chain and the beer :lol:
richv
lives on this board 24/7!!!
 
Posts: 487
Joined: Mon Dec 16, 2002 7:25 pm

Postby Andrew G » Fri Sep 14, 2007 12:29 pm

Let's not start again :)

Will probably get KMC chains next time as they have a quick link and are supposed to be extremely smooth running and long lasting.

I think a lot of it is weight weenieness gone mad. The latest chains have drilled plates and hollow rivets! How much weight is that going to save :roll: , just blow your nose before the ride, save the same amount and keep the chain stronger.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Postby Andrew G » Fri Sep 14, 2007 12:46 pm

We obviously crossed posts, but glad to have my thoughts confirmed by a KMC user.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Postby Mike I » Fri Sep 14, 2007 12:59 pm

I use a Record chain. Guy in GBs effectively refused to sell me the special Campag tool and told me just to be really careful with a £10 Park Tool chain remover. Seems to work ok (and has for 4 or 5 chains now) and saves you the bother of fiddling about with that crazy little link rivet.

It is a fact though - supported by extensive research which I just made up - that chains with a quick link get cleaned up to 4.7 times as often as those without.
User avatar
Mike I
lives on this board 24/7!!!
 
Posts: 1454
Joined: Fri Feb 21, 2003 9:35 am
Location: Tooting

Postby Dominic » Fri Sep 14, 2007 1:39 pm

Have to agree with RichV. I buy two cheap chains (KMC or SRAM) and then replace the chains every 1000 miles or so dependant on weather etc. Also saves having to replace the cassette every time.
Dominic
lives on this board 24/7!!!
 
Posts: 1137
Joined: Sat Jun 17, 2006 6:43 pm
Location: Merstham

Postby Dominic » Fri Sep 14, 2007 1:50 pm

Sean,

It you run a chain on a cassette for too many miles they become meshed (if that is the right word) ie they wear in together. What happens when you then put a new chain on is that the chain will not grip and slip on the sprockets or certain sprockets, usually the mains ones you use.

It can also happned with the front rings but is not so common.
Dominic
lives on this board 24/7!!!
 
Posts: 1137
Joined: Sat Jun 17, 2006 6:43 pm
Location: Merstham

Postby mrP(Boonen)VT » Fri Sep 14, 2007 1:59 pm

I put a record chain together with a Park tool, and it was fiddly, but possible.

I have also used the KMC chains and would recommend them :wink: particularly with the easy to use connector. :D [/code]
Guru P
User avatar
mrP(Boonen)VT
lives on this board 24/7!!!
 
Posts: 4430
Joined: Mon Dec 02, 2002 9:10 pm
Location: kitchen chair

Postby Elliot M » Fri Sep 14, 2007 2:00 pm

you can get a device for a few quid which measures chain stretch and tells you when to replace.
Elliot M
lives on this board 24/7!!!
 
Posts: 1648
Joined: Mon Dec 02, 2002 10:09 am
Location: On the Merlin Extralight

Postby mrP(Boonen)VT » Fri Sep 14, 2007 2:02 pm

Got one :wink:
Guru P
User avatar
mrP(Boonen)VT
lives on this board 24/7!!!
 
Posts: 4430
Joined: Mon Dec 02, 2002 9:10 pm
Location: kitchen chair

Postby Andrew G » Fri Sep 14, 2007 2:11 pm

[quote="Elliot M"]you can get a device for a few quid which measures chain stretch and tells you when to replace.

A ruler :wink:

If memory serves 12 full links = 30cm.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Postby mrP(Boonen)VT » Fri Sep 14, 2007 3:15 pm

Got one of them as well :wink:
Guru P
User avatar
mrP(Boonen)VT
lives on this board 24/7!!!
 
Posts: 4430
Joined: Mon Dec 02, 2002 9:10 pm
Location: kitchen chair

Postby Grahame » Fri Sep 14, 2007 3:20 pm

[quote="Andrew G"][quote="Elliot M"]you can get a device for a few quid which measures chain stretch and tells you when to replace.

A ruler :wink:

If memory serves 12 full links = 30cm.


To be pedantic, bicycle chains are still made to imperial measurements. Each link of a new chain is 1/2", so 12 "full" (or pair of) links will be 12" long when under slight tension. Once 12 full links measure 12 1/8" under rear derrailleur tension it's time to change your chain. Any longer and you are in danger of having to replace the cassette as well.
Grahame
lives on this board 24/7!!!
 
Posts: 1636
Joined: Thu Dec 04, 2003 12:27 pm
Location: On the highway to hell (and I've not even told my mum when I'll be back)

Postby Jon H » Fri Sep 14, 2007 3:38 pm

[Pedantic Mechanical Engineer mode on :D ]

Chains don't stretch, they wear.

Stretching implies that there is permanent plastic deformation happening, which is not the case. What actually happens is that material gradually gets worn away from the pivots and bushes in each link, making them a slightly looser fit. So even though the parts are getting smaller, the chain as a whole gets longer.

[Pedantic Mechanical Engineer mode off :wink: ]
User avatar
Jon H
lives on this board 24/7!!!
 
Posts: 3392
Joined: Wed Nov 27, 2002 1:30 pm
Location: Bromley

Postby Andrew G » Fri Sep 14, 2007 3:51 pm

So it doesn't stretch then :wink:
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Next

Return to General

Who is online

Users browsing this forum: No registered users and 5 guests

cron