Campag Brake Blocks

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Campag Brake Blocks

Postby Forbes » Mon Feb 18, 2008 10:23 pm

This is a really stupid question, but, does anyone have any advice on getting used Campag brake pads out of the blocks? I've been trying with brute force, levering it with screwdrivers, etc... do I just need to put more effort into it, or is there some technique I'm missing?

Any advice gratefully recieved
Alex
Forbes
is new here, be extra Agreeable to them!
 
Posts: 15
Joined: Sat Jul 08, 2006 4:52 pm
Location: Location, Location

Re: Campag Brake Blocks

Postby Tony » Mon Feb 18, 2008 11:01 pm

Done it once before and struggled big time too.....

From what I remember - the brake block has a bolt sticking out the back of it (i.e. the bolt that you use to secure it to the caliper). If you push that bolt 'inwwards', I think it actually pushes on the the inside of the pad and helps to loosen the pad very slightly from the block (NB: It is only loosens it a bit - it's not a golden bullet!). Then with a pair of pliers (or even two pairs) and a bit of swearing you should be able to get the pad to slide out of the block.

You then have the joys of getting the new pad in place - which is not a lot easier in my experience. I used some fairy liquid and also made my hands very tired in the process.... I may even have resorted to using a vice - I can't honestly remember. But with some perseverence I eventually got there.
User avatar
Tony
lives on this board 24/7!!!
 
Posts: 370
Joined: Mon Dec 30, 2002 4:58 pm

Re: Campag Brake Blocks

Postby -Adam- » Mon Feb 18, 2008 11:06 pm

sh1t :wink:

Offensive language removed by moderator
User avatar
-Adam-
lives on this board 24/7!!!
 
Posts: 3515
Joined: Thu Jan 12, 2006 9:38 pm
Location: Kingston/Epsom, well, everywhere really!

Re: Campag Brake Blocks

Postby Andrew G » Tue Feb 19, 2008 9:53 am

A nightmare, but I think all removable pads will be tricky, after all you don't want them coming loose.

I just use the other all-in-one type now, so much easier and they still stop you quickly with a dual pivot caliper.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Campag Brake Blocks

Postby Jon H » Tue Feb 19, 2008 10:20 am

I find replacing the pads in my Shimano brakes really quite easy :evil:
User avatar
Jon H
lives on this board 24/7!!!
 
Posts: 3392
Joined: Wed Nov 27, 2002 1:30 pm
Location: Bromley

Re: Campag Brake Blocks

Postby Andrew G » Tue Feb 19, 2008 12:15 pm

Alex,

When I did wrestle mine out it was just as much fun getting the new ones in :roll: .
GB's were doing the old style Xenon and Mirage calipers complete with the all-in-one type pads for £14 and £17 to shift old stock. They are perfectly good calipers and with this deal they work out cheaper than just buying the blocks. If they've got any left I'd grab a set and then you've got a spare set of calipers for later too. :)
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Campag Brake Blocks

Postby Jim B » Tue Feb 19, 2008 6:38 pm

I clamped the pad itself lengthways into the vice. Nip it up a little and it will make the blocks slightly narrower and ease them away from the side of the shoe.
Do the same thing for getting it back in. Might also be worth sticking the new pads in the freezer first to see if it shrinks them slightly. Still a sod of a job though.
Jim B
...
 
Posts: 178
Joined: Wed Jul 06, 2005 10:51 pm
Location: Caterham

Re: Campag Brake Blocks

Postby -Adam- » Tue Feb 19, 2008 7:34 pm

[quote="Jon Hemming"]I find replacing the pads in my Shimano brakes really quite easy :evil:


Likewise! 8)
User avatar
-Adam-
lives on this board 24/7!!!
 
Posts: 3515
Joined: Thu Jan 12, 2006 9:38 pm
Location: Kingston/Epsom, well, everywhere really!

Re: Campag Brake Blocks

Postby Steve B » Tue Feb 19, 2008 11:02 pm

I find the Shimano pads really hard to remove. I mean, I have to actually pick up and use an allen key to undo the grub screw, and then I have to physically (with at least 1 or 2 fingers) slide the block out without hardly any force at all. It's a nightmare :wink:
Steve B
lives on this board 24/7!!!
 
Posts: 395
Joined: Mon Feb 27, 2006 6:55 pm
Location: Sutton

Re: Campag Brake Blocks

Postby -Adam- » Wed Feb 20, 2008 12:20 am

[quote="-Adam-"][campag] sh1t :wink:

Offensive language removed by moderator


Whatever happened to free speech!?

Or did the mafia hack in and stop me slurring a world famous Italian brand name?
User avatar
-Adam-
lives on this board 24/7!!!
 
Posts: 3515
Joined: Thu Jan 12, 2006 9:38 pm
Location: Kingston/Epsom, well, everywhere really!

Re: Campag Brake Blocks

Postby Ivor » Wed Feb 20, 2008 10:30 am

[quote="Steve B"]I find the Shimano pads really hard to remove. I mean, I have to actually pick up and use an allen key to undo the grub screw, and then I have to physically (with at least 1 or 2 fingers) slide the block out without hardly any force at all. It's a nightmare :wink:

Changed mine over last night. Very annoying they just slipped out of the blocks once I undid the grub screw and I actually had to bend over and pick the pads back up can you imagine. Terrible. :mrgreen:
User avatar
Ivor
lives on this board 24/7!!!
 
Posts: 1268
Joined: Wed Jan 23, 2008 5:10 pm
Location: Oxted, Surrey

Re: Campag Brake Blocks

Postby Ivor » Wed Feb 20, 2008 10:32 am

[quote="-Adam-"]Whatever happened to free speech!?
Or did the mafia hack in and stop me slurring a world famous Italian brand name?

I took it as he'd removed the word c**pag because it was the one that was offensive. :lol:
User avatar
Ivor
lives on this board 24/7!!!
 
Posts: 1268
Joined: Wed Jan 23, 2008 5:10 pm
Location: Oxted, Surrey
Top

Re: Campag Brake Blocks

Postby -Adam- » Wed Feb 20, 2008 12:11 pm

Oh I see, how foolish of me to even question that!
User avatar
-Adam-
lives on this board 24/7!!!
 
Posts: 3515
Joined: Thu Jan 12, 2006 9:38 pm
Location: Kingston/Epsom, well, everywhere really!

Re: Campag Brake Blocks

Postby Andrew G » Wed Feb 20, 2008 12:21 pm

:roll:
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Campag Brake Blocks

Postby Ivor » Wed Feb 20, 2008 12:34 pm

:lol:
User avatar
Ivor
lives on this board 24/7!!!
 
Posts: 1268
Joined: Wed Jan 23, 2008 5:10 pm
Location: Oxted, Surrey

Next

Return to General

Who is online

Users browsing this forum: No registered users and 5 guests

cron