Travel abroard

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Travel abroard

Postby Andy S » Sun Mar 16, 2008 11:38 am

Hi all, just looking for a bit of advice.
Taking my bike to Spain next week and wanted to know whether I should deflate the tyres, or will they be ok if left at fUll pressure?
Rest of the bike will be well wrapped, but what should I put on the chain ring to protect it - this will be the main bit touching the bottom of the bag.

Thanks

Andy S
Andy S
..
 
Posts: 56
Joined: Mon Jan 27, 2003 8:05 pm
Location: Oxted

Re: Travel abroard

Postby Dombo » Sun Mar 16, 2008 12:07 pm

Some airlines want them deflated. Bubble wrap for the chainrings.
User avatar
Dombo
lives on this board 24/7!!!
 
Posts: 1853
Joined: Wed Dec 08, 2004 3:03 pm

Re: Travel abroard

Postby Andrew G » Sun Mar 16, 2008 3:52 pm

Chainrings - I use some pipe lagging. If you cut a couple of Vs out of it to aid bending you can wrap it around the chainset. I then hold it in place with a couple of cable ties, remember to take some spares for coming home.

Tyres - As Sean says I think it's a red herring. I let some air out so that they aren't at full pressure, about 2/3rds, as a bit of a play safe but also allows protection of the rims.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Travel abroard

Postby Andy S » Sun Mar 16, 2008 4:34 pm

Thanks guy's

Pipe lagging, bubble wrap and air in the tyres it is then :lol:

See you in acouple of weeks - if I get there and back in one piece :roll:

Andy S
Andy S
..
 
Posts: 56
Joined: Mon Jan 27, 2003 8:05 pm
Location: Oxted

Re: Travel abroard

Postby mrP(Boonen)VT » Mon Mar 17, 2008 9:08 am

[quote]Tyres - As Sean says I think it's a red herring. I let some air out so that they aren't at full pressure, about 2/3rds, as a bit of a play safe but also allows protection of the rims.


Absolutely right. Scientificly the air pressure can vary by +- 10%, so you're safe with around 80/100psi which is what I have always done with no problems
User avatar
mrP(Boonen)VT
lives on this board 24/7!!!
 
Posts: 4430
Joined: Mon Dec 02, 2002 9:10 pm
Location: kitchen chair


Return to General

Who is online

Users browsing this forum: No registered users and 37 guests

cron