Carlton Massed Start ?

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Carlton Massed Start ?

Postby TimN » Wed Aug 06, 2008 2:49 pm

I'm looking for a bike, not just any bike. My dad used to race in the late 1940's and 50's all over the place but in a fit of madness about eight years ago he sold his favourite bike and now i'm trying to find it or one like it for him. I'd like to ride it on the same routes he did and he would love to see it again.

I have all the details including serial number, geometry, components etc but for the moment i would be happy to just get hold of a frame size 22 or 23"

any ideas where i might get one, yes i realise i have got no chance!
TimN
.
 
Posts: 35
Joined: Fri Mar 28, 2008 12:02 pm

Re: Carlton Massed Start ?

Postby mrP(Boonen)VT » Wed Aug 06, 2008 3:25 pm

I have my old Roberts from the 1980's, but it is steel (Columbus something or other) looking for a good home.

It was at one time my top of the range racing bike, then it was put into use as a training bike, and now just gathers dust.

It needs some TLC (and maybe a respray), but has braze ons for downtube levers etc.
User avatar
mrP(Boonen)VT
lives on this board 24/7!!!
 
Posts: 4430
Joined: Mon Dec 02, 2002 9:10 pm
Location: kitchen chair

Re: Carlton Massed Start ?

Postby Andrew G » Wed Aug 06, 2008 4:30 pm

A retro bike thread :D . Good luck in your quest Tim, you could try an email to the CTC or something and see it they can offer up any suggestions on how to try and reunite man and machine.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Carlton Massed Start ?

Postby Jon H » Wed Aug 06, 2008 4:42 pm

You could put a "wanted" advert in the CTC magazine, Cycling Weekly, & Cycling Plus.
User avatar
Jon H
lives on this board 24/7!!!
 
Posts: 3392
Joined: Wed Nov 27, 2002 1:30 pm
Location: Bromley

Re: Carlton Massed Start ?

Postby Jon H » Wed Aug 06, 2008 4:48 pm

Or contact the [url=http://www.v-cc.org.uk/index.html]Veteren Cycle Club[/url]
User avatar
Jon H
lives on this board 24/7!!!
 
Posts: 3392
Joined: Wed Nov 27, 2002 1:30 pm
Location: Bromley

Re: Carlton Massed Start ?

Postby TimN » Wed Aug 06, 2008 5:32 pm

great work fellers i'll give it a go, my old man would be chuffed to crinkles i i could get hold of it.
TimN
.
 
Posts: 35
Joined: Fri Mar 28, 2008 12:02 pm

Re: Carlton Massed Start ?

Postby Mike I » Wed Aug 06, 2008 8:49 pm

I bet my dad's old bike was cooler than your dad's old bike ... :lol:


[img]http://i38.tinypic.com/t8668k.jpg[/img]

There are probably a load of old chaps with toe-clips who might help here [url]http://www.carltoncycles.me.uk/home.htm[/url]

There's a great piece here [url]http://www.classiclightweights.co.uk/bikes/v-hetchins.html[/url] about going back to your old bike, or something a lot like it.

Should you find the frame you're looking for, you'll need some bits to hang on it, and bike jumbles are great fun [url]http://www.bikejumbles.co.uk/[/url].

You really can't beat a retro bike thread, can you? :wink:
User avatar
Mike I
lives on this board 24/7!!!
 
Posts: 1454
Joined: Fri Feb 21, 2003 9:35 am
Location: Tooting

Re: Carlton Massed Start ?

Postby Andrew G » Wed Aug 06, 2008 11:15 pm

Nice relaxed angle on the seat tube Mike.
60s vintage (when shorts were short :D ) Little Green Man Sr. (I'm sure Sean will approve of the frame).
[img]http://i115.photobucket.com/albums/n315/andrewgreen23/RGTTCDwyersCondorweb.jpg[/img]
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Carlton Massed Start ?

Postby Mike I » Thu Aug 07, 2008 8:20 am

Relaxed angle? Look again! The seat tube joins the down tube some inches (not centimetres, obviously) above the bottom bracket, producing a stupidly short wheelbase.

Nice cap, Roy!
User avatar
Mike I
lives on this board 24/7!!!
 
Posts: 1454
Joined: Fri Feb 21, 2003 9:35 am
Location: Tooting

Re: Carlton Massed Start ?

Postby Andrew G » Thu Aug 07, 2008 8:22 am

Oh yeah. I guess your Dad doesn't have it anymore or we'd have seen you on a CR/Evening 10 on it.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Carlton Massed Start ?

Postby kieran » Thu Aug 07, 2008 9:39 am

Hey Mike, your Dad looked a bit of a cool poser ! Would be in Ralpha gear nowadays?
User avatar
kieran
lives on this board 24/7!!!
 
Posts: 1626
Joined: Mon Mar 15, 2004 11:18 am
Location: Tír na nÓg

Re: Carlton Massed Start ?

Postby Andrew G » Thu Aug 07, 2008 9:45 am

[quote="kieran"]Would be in Ralpha gear nowadays?

They've copied the design of his kit already.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Carlton Massed Start ?

Postby John the old'un » Thu Aug 07, 2008 9:55 am

Hi Andrew, Same era as Roy, I reckon. This was 1961. :lol:
[img]http://i34.tinypic.com/idua9f.jpg[/img]
John the old'un
lives on this board 24/7!!!
 
Posts: 494
Joined: Sun Aug 15, 2004 7:51 pm
Location: Isle of Wight

Re: Carlton Massed Start ?

Postby Snoop Doug » Thu Aug 07, 2008 10:13 am

This stuff is great. I'm the first in a short line of cyclists so I can't look directly over my shoulder and see this stuff, it's all good.

Snoop
Snoop Doug
 

Re: Carlton Massed Start ?

Postby Elliot M » Thu Aug 07, 2008 10:39 am

cool. sean/andrew - have you seen the retro wool Condor/Mackeson 60th anniversary jerseys?
Elliot M
lives on this board 24/7!!!
 
Posts: 1648
Joined: Mon Dec 02, 2002 10:09 am
Location: On the Merlin Extralight

Next

Return to General

Who is online

Users browsing this forum: No registered users and 38 guests

cron