Slick Changes

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Slick Changes

Postby Keith » Mon Feb 22, 2010 10:33 pm

Has anyone any experience of "high performance" cables?

    Something like Gore Ride-On (Low Friction or Professional) or Nokon Konkavex?
    Worth the extra expense?
    Worth using on gear cable, brake cable, or both?
User avatar
Keith
lives on this board 24/7!!!
 
Posts: 1796
Joined: Sun Sep 23, 2007 2:55 pm

Re: Slick Changes

Postby Alex S » Mon Feb 22, 2010 10:50 pm

Loads of people don't use them, its not going to make you go any faster. Gear shifting efficiency is going to be dominated by how well tuned your derailleurs are and how worn your rings are etc.

Get them if you keep having problems with grit in your cables - diagnosed by a lot of friction when releasing tension - i.e. brake calipers don't release from the rims properly etc.
User avatar
Alex S
...
 
Posts: 196
Joined: Sat Jan 24, 2009 9:23 am
Location: SM6 0TF

Re: Slick Changes

Postby Andrew G » Mon Feb 22, 2010 10:58 pm

A lot of people use nokon cables on TT bikes but that's more to do with the ability to do tight cable runs with them through bars etc. I haven't got them myself, yet, but it's not going to have as bigger impact in a TT as a RR as the changes tend to be a lot more predictable and less frequent.
Andrew G
lives on this board 24/7!!!
 
Posts: 10477
Joined: Tue Oct 04, 2005 6:47 pm
Location: Selsdon

Re: Slick Changes

Postby Ivor » Tue Feb 23, 2010 6:55 am

The other reason to get them is simply for the "nice feel" of changing.
Never used the really expensive cables but it's certainly noticeable when you replace old cables that have had some water damage over time with a nice slippy new set. I guess the sealed cables stay like that for longer.
User avatar
Ivor
lives on this board 24/7!!!
 
Posts: 1268
Joined: Wed Jan 23, 2008 5:10 pm
Location: Oxted, Surrey

Re: Slick Changes

Postby Wal » Tue Feb 23, 2010 9:11 am

Back in the '90s, friends of mine who used the original Gore Ride-On cables on their MTBs always found they worked brilliantly for a while, then pretty much seized up as soon as the tiniest bit of grit found its way inside the lining. They all ended up switching back to standard Shimano cables. The latest versions may be much improved - check reviews.

For a cheaper alternative, take a look at Transfil Flying Snake cables, which have performed very well on my MTB. Like Gore Ride-Ons these use a full length liner and seem to keep the mud out quite well, promoting long-lasting smooth and precise shifting (although, my MTB has full-length housing to the rear derailleur, which helps with this).

Alligator I-Links are cheaper and lighter than Nokons, and from what I read, work just as well while being easier to install because unlike the Nokon system the links click together. Alligator has recently released a new smaller diameter, ultralight version for shifters only, which I'm thinking of switching to my road bike to when its current Dura Ace housings are due for replacement.
User avatar
Wal
lives on this board 24/7!!!
 
Posts: 281
Joined: Wed Jul 12, 2006 10:36 am
Location: Croydon


Return to General

Who is online

Users browsing this forum: No registered users and 71 guests

cron